They had an enjoyable week hosting many visitors to the stand from all over the world. Of course, they no ... Devamını oku...K 2019 in review
Infrared (IR) heating is an exact and measurable science. With its own history and terminology, it’s framed and bound by several perpetual scientific and physical laws. While we consider these principles and laws, we also outline the main applications for IR heating technology as it’s practised today.
At its most basic, IR heat is produced through temperature differentials between objects. Any object at a temperature greater than 0 K (-273.15°C) radiates infrared energy, and when one object is hotter than another, IR energy will flow from the hotter object to the colder one. The surface of the objects will play a key role in both the emission of the IR energy and in the absorption of the energy emitted.
Sharing several characteristics of solar radiation, it’s sometimes popularly described as ‘sunshine without light’. The physics of IR energy are similar to light – another solar property. However, most of the IR spectrum lies beyond that which is visible to the human eye. As such, infrared heat can be best thought of as a form of energy or radiation.
But in scientific terms, IR heat is a wave of electromagnetic radiation. And for industrial purposes, these IR waves are utilised in three main forms of delivery:
Shortwave (0.78 – 1.4 μm)
Mediumwave (1.4 – 3 μm)
Longwave (3 – 1000 μm)
Heat is defined as energy transferred by virtue of a temperature difference. As heat only moves in one direction, flowing from regions of higher temperature to regions of lower temperature, heat energy will naturally flow from one to the other until both regions are the same temperature.
Heat is a form of energy and is measured in either Joules (J) or British Thermal Units (BTUs). The Joule is an SI unit and is most commonly used in this sector. BTUs is a mainly US term despite its name. The calorie (cal) is rarely used in the IR sector.
Heating power is measured in Watts (W) and is defined as one Joule per second.
Heat Flux (Φq) is defined as heating power per unit area and is measured in units – either W/m2 or W/cm2.
With temperature measured using several scales the most commonly used in the industry is Degrees Celsius (°C). However, Kelvin (K) is a more scientific unit that has an absolute scale, while Fahrenheit (°F) is used mainly in the USA.
There are three principal methods of heat transfer: conduction, convection and radiation.
Conductive heat a direct heat transfer between two physical bodies/properties.
The symbol ‘k’ is a measure of how well various substances transmit heat. The amount of heat that can be transferred through a surface depends on the temperature difference, the surface area, the material thermal conductivity, and material thickness.
Convective heat transfer occurs by the movement of fluids (liquids and gases). When a fluid heats up it expands and decreases in density. A convection current forms as warm fluid rises and cool fluid sinks. Thermal energy (heat) is carried by the particles in these moving currents from one location to another. Convection can be free convection using the surrounding fluid (liquid or gas) or forced convection when a pump or fan is used.
Convectional heat also depends on the surface area. If the surface contacting the fluid is increased, the rate of heat transfer also increases. This is why almost all convectional devices have fins for efficient operation and delivery.
Radiant heat transfer is non-contact and therefore requires no medium for heat transfer. Radiation is heat transfer by electromagnetic waves (including light) produced by objects because of their temperature. The higher the temperature of an object, the greater the thermal radiation it emits. Radiant heat transfer occurs when the emitted radiation strikes another body and is absorbed.
As we’ve already mentioned, infrared radiation is an electromagnetic wave which doesn’t require a medium for heat transfer. Infrared (‘below red’ in Latin ) is electromagnetic radiation in the wavelength range of 0.78 μm and 1000 μm (1 mm). Radiation of shorter wavelengths is more energetic and contains more thermal energy. The diagram below shows the relationship between wavelength and frequency:
Infrared radiation uses electromagnetic waves travelling at the speed of light.
Thermal radiation is emitted by any matter with a temperature above 0 K (-273.15°C).
Radiative heat transfer occurs when the emitted electromagnetic waves are absorbed.
In theory, IR radiation can emit in all directions. Infrared emitters, therefore, need to be designed and made in order to follow ‘line of sight’ or view factor principles. View factor (Vf) principles are calibrated from 0 to 1 defining the amount of radiant energy emitted from the source hitting the target body. The view factor is better closer to 1, so the use of reflectors, or re-emitters, can improve the view factor.
All infrared emissions are either reflected, absorbed, or transmitted. There is a simple and arithmetic relationship between these three factors which totals 1 or 100%. This totality is termed a black body – an idealised physical entity that absorbs all electromagnetic radiation.
Total radiation = Reflection + Absorption + Transmission
As IR heating has evolved, so has the fundamental science that underpins the workings of its heat transfer, but three main laws apply:
Stefan-Boltzmann Law: Gives the total power radiated at a specific temperature from an IR source.
Planck’s Law: Gives the spectral distribution of radiation from a black body source – one that emits 100% radiation at a specific temperature.
Wien’s Law: Following on from Planck’s Law, this predicts the wavelength at which the spectral distribution of the radiation emitted by a black body is at a maximum point.
The Steffan-Boltzmann Law relates primarily to infrared emissivity. Calculating the power radiation from an IR source based upon the object’s surface area temperature and together with a black body factor. A perfect black body has a factor of 1 – with other materials varying in that factor (see table below). When we allow for the emissivity of normal materials the Stefan-Boltzmann Law becomes:
Within the definition of Kirchhoff’s law of thermal radiation, for any arbitrary body emitting and absorbing thermal radiation, the emissivity is equal to its absorptivity. This means that emissivity is useful to determine how much a surface will absorb as well as emit.
| Aluminium polished 0.09 | Brass polished 0.03 | Bronze polished 0.10 |
| Carbon ( candle soot ) 0.95 | Ceramic (glazed porcelain) 0.92 | Chromium polished 0.10 |
| Concrete 0.85 | Copper polished 0.02 | Copper oxidised 0.65 |
| Glass fused quartz 0.75 | Iron polished 0.21 | Iron rusted 0.65 |
| Plastic opaque 0.95 | Silver polished 0.05 | Stainless steel polished 0.16 |
| Stainless steel oxidised 0.83 | Water 0.96 |
Using this law means we can now calculate the net heat transfer between two emitting surfaces at T1 and T2. As both are emitting, the net power transfer will be the difference between both emitted power outputs.
Planck’s Law describes the electromagnetic radiation emitted by a black body in thermal equilibrium at a definite temperature. It is named after Max Planck, a German physicist who proposed it in 1900.
When plotted for various heater (emitter) temperatures, Planck’s law predicts:
Please see ‘Explanatory notes on Planck’s Law’ below.
Wien’s Law is a follow on from Planck’s Law and predicts the wavelength at which the spectral distribution of the radiation emitted by a black body is at a maximum point.
A perfect black-body is a surface that reflects nothing and emits pure thermal radiation. The graph of power versus wavelength for a perfect black-body is called the black-body spectrum (see diagram below). Notice the dotted red line formed when we connect the maximum points of each temperature curve on Planck’s distribution and connect them.
As the temperature rises, thermal radiation produces shorter wavelength, higher energy light. From the graph below, we can see how a light bulb produces a certain quantity of energy with only a small part in the visible spectrum. As temperature increases and the peak wavelength becomes shorter, the greater the amount of radiated energy.
The graph also shows that a rock at room temperature will not ‘glow’ as the curve for 20°C does not extend into the visible spectrum. As objects heat up, they start to give off visible light, or glow. At 600°C objects glow a dull red. At 1,000°C, the colour is yellow-orange, turning to white at 1,500°C.
Two other scientific laws inform the practical application of infrared radiant heat – the Inverse Square Law and Lambert’s Cosine Law.
The Inverse Square Law defines the relationship of radiant energy between an IR source and its object – that the intensity per unit area varies in inverse proportion to the square of that distance. However, in practice, the Inverse Square Law is less effective when concerned with large parallel surfaces, such as heated platens and oven systems.
Lambert’s Cosine Law allows for the calculation of IR intensity when the radiation is not applied directly to the target body but is set at an angle. This law applies mainly to small sources radiating over a relatively large distance.
Infrared emitters used in industrial heating generally have a usable peak emission wavelength in the range of 0.75 to 10 μm. Within this range, there are three sub-divisions which are long, medium and short wave.
Longwave emitters, also known as far-infrared (FIR), have a peak emission range in the 3-10 μm range. This range generally refers to ceramic elements which consist of a high-temperature resistance alloy coil embedded into either a solid or hollow constructed highly emissive ceramic body. Ceramic emitters are manufactured in a number of industry-standard sizes with either flat or curved (trough style) emitting surfaces.
Shorter peak emission wavelengths are achieved by using emission sources with higher surface temperatures. Quartz cassette-style emitters are available in similar industry-standard sizes to that of ceramic and consist of a series of translucent quartz tubes built into a polished aluminised steel housing. These emitters can operate with higher front surface temperature and emit in the long to medium wave range.
At the shorter end of the medium wave range is the quartz tungsten emitter which consists of a sealed linear clear quartz tube containing a star design tungsten coil. The tungsten coil provides a fast response time with low thermal inertia.
The short wave quartz halogen range are of similar construction to that of the fast-medium wave tungsten emitter with the exception that a round tungsten coil is employed and quartz tubes are filled with halogen gas. The higher coil temperature results in the generation of white light and a peak emission wavelength in the short wave range.
Planck’s Law tells us that as the temperature of any emitting surface increases, more and more energy will be released as infrared energy. The higher the object temperature, the greater the amount of infrared energy will be produced. As well as becoming more intense (power) the emitted frequencies become wider and the peak wavelength becomes shorter.
At very high temperatures, not just infrared, some shorter wavelength visible light will also be produced. This is first witnessed as a dull red glow, then to orange, yellow, and finally white. Figure 1 (below) shows typical Planck’s Law curves for a range of temperatures plotted from 1050°C to 50°C.
The pink curve corresponding to 1050°C exhibits the strongest output. It shows the highest power output and its peak is at around 2.5 microns. This is followed by the curve at 850°C where the peak energy is less than half of that produced at 1150°C.
As the temperature decreases, the energy levels also drop, and the peak energy wavelength shifts to the longer wavelengths. The lowest temperatures from the 250°C, 100°C, and 50°C curves cannot be seen in the graph, but when the graph is enlarged to see the lower temperature curves, this shift to the longer wavelengths is more apparent. However, the power intensity drops significantly.
This is shown in Figure 2 (below). At 250°C, the blue curve can be seen to have an approximate peak ~ 6 microns, whereas at 100°C the peak wavelength is ~ 7.5 microns. Note also that the extent of wavelength is more evenly distributed and doesn’t exhibit the concentrated narrow peak seen at higher temperatures.
If we enlarge the same graph again and focus only on the lower temperatures as shown in Figure 3 (below), we see temperatures of 50°C and 25°C have peak wavelengths of ~ 9 and 10 microns respectively.
Planck’s Law describes the electromagnetic radiation emitted by a black body in thermal equilibrium at a definite temperature. When plotted for various heater (emitter) temperatures, the law predicts:
When selecting an infrared emitter for a particular heating task, the target material absorption characteristics are of high importance. Ideally, the emitted infrared frequencies and the target material absorption frequencies should match to allow the most efficient heat transfer.
However as can be seen from the previous graphs, at longer wavelengths, the amount of energy transferred will be lower due to the lower emitter temperatures, therefore heating times will usually take longer. The shorter the wavelength, the higher the emitter temperature and the available infrared power increases rapidly.
İnfrared ısıtma uzmanlarımız sorularınızı yanıtlamaktan memnun olacaklar.
İkitelli O.S.B. Giyim Sanatkarlari İş ve Tic. Mrkz.3. Ada A Blok No:102, 34490, Başakşehir, Istanbul / Türkiye
0 212 549 48 39
İkitelli O.S.B. Giyim Sanatkarlari İş ve Tic. Mrkz.3. Ada A Blok No:102, 34490, Başakşehir, Istanbul / Türkiye
0 212 549 48 39
©2019 Ceramicx Ltd | Web Development by D2 Creative
Giriş
Kayıt
